Gilbert & East Valley Floor Coatings
Epoxy Floors Built for Arizona Heat
Garage, commercial, and decorative floor coatings installed in 1–2 days. 100% solids epoxy at ≥10 mil — the systems built to survive Arizona slab heat.
- Free in-home quote within 24 hours
- 1–2 day install — back to parking fast
- 100% solids epoxy, ≥10 mil — no big-box kits
- Serving the entire East Valley
Call or text — we answer 7 days a week.
Get your free quote
Tell us about your floor — we respond within 24 hours. No obligation.
100%
Solids Epoxy
≥10 mil
Film Thickness
UV-Stable
Polyaspartic Topcoat
24 hr
Quote Response
What we install
Five coating systems, all installed on 100% solids product with UV-stable topcoats — engineered for Arizona slab temps.
Garage Floor Epoxy
100% solids epoxy systems with broadcast flake. The most durable finish for your Gilbert garage.
Metallic Epoxy Floors
Three-dimensional metallic pigment systems for showroom garages, retail, and custom homes.
Polyaspartic Coatings
UV-stable aliphatic polyaspartic — faster cure and a one-day install for garages that can't sit idle.
Commercial Epoxy
Industrial-grade floor systems for warehouses, restaurants, breweries, and medical facilities.
Concrete Polishing
Mechanical grind + densifier for a low-maintenance, high-durability polished concrete surface.
Not sure which system fits your project?
Get a free recommendationBuilt for Arizona heat — not just built
Every system we specify is engineered for Phoenix East Valley conditions: 110°F+ slab temps, 300 sunny days, monsoon humidity swings.
Slab-temp tested
Arizona garage slabs reach 90–115°F in summer even in shade. We use 100% solids epoxy with high Tg (glass transition temperature) so the floor stays hard when tires are hot.
Back in service fast
Polyaspartic systems return to vehicle traffic in 24 hours. Full epoxy systems need 72 hours cure before parking. We give you exact timelines when we schedule so you can plan around it.
Built to spec, not to a price
Diamond grind to CSP 2–3, 100% solids epoxy at ≥10 mil, full chip broadcast, UV-stable polyaspartic topcoat. No acid etching, no water-based product, no aromatic topcoats that yellow in Phoenix sun.
Our installation process
Six steps, no shortcuts. AZ heat resilience starts with what happens before the first coat goes down.
Diamond grind to profile
We grind to CSP 2–3 (Concrete Surface Profile) — the mechanical anchor that makes coatings adhere. Acid etching is faster and cheaper; it also fails faster in AZ heat.
Crack chase + patch
We route structural cracks and fill with semi-rigid polyurea filler. Rigid patches crack again. Semi-rigid moves with the slab through temperature cycling.
Moisture vapor test
Arizona slabs look dry but often aren't. We test moisture vapor emission rate before coating. Coating over moisture without treatment causes blistering within 1–3 years.
100% solids epoxy primer
A dedicated primer coat penetrates the ground concrete and creates the chemical bond layer. Some contractors skip this — we don't, because it's what long-term adhesion in Arizona heat depends on.
Base coat + chip broadcast
Full 100% solids epoxy base coat at ≥10 mil DFT. Chip broadcast at full (100%) coverage for maximum texture and grip. Color blends chosen at your in-home estimate.
UV-stable polyaspartic topcoat
Aliphatic polyaspartic or polyurethane topcoat — UV-stable chemistry so the floor won't yellow under 300 sunny days per year. The cap coat that makes the system last in AZ heat.
Three systems. One standard.
Your project, your timeline, your budget — we match the right system to your situation.
1-Day System
Polyaspartic
Full polyaspartic system top-to-bottom. UV-stable, faster return to service (24-hour vehicle traffic). Best when schedule is tight or temperatures are low.
From $7/sqft installed
2-Day System (Most Popular)
Epoxy + Flake
100% solids epoxy base at ≥10 mil, full chip broadcast, UV-stable polyaspartic topcoat. Maximum film thickness, best long-term value. The most common choice for East Valley 3-car garages.
From $6/sqft installed
2-Day Premium
Metallic Epoxy
Mica and metalite pigment system with double polyaspartic topcoat. 3D depth effect, no two floors identical. For showroom garages, retail, and custom homes.
From $9/sqft installed
Talk to an installer directly — no call center, no pressure.
Call (480) 331-7257Finishes we install
Two of the most popular epoxy systems for the East Valley — high-gloss metallic flake for home garages, and hard-wearing solid color for commercial and shop floors.
We serve the entire East Valley
Gilbert is our home base. We run crews to Mesa, Chandler, Queen Creek, San Tan Valley, and Tempe daily.
Gilbert, AZ
Master-planned communities with 3-car garages — Gilbert slabs installed after 2005 are ideal epoxy candidates.
View service area →Mesa, AZ
From older central Mesa to the Eastmark growth corridor — we know how to prep every slab vintage.
View service area →Chandler, AZ
Tech-corridor income, metallic systems, and slip-resistant coatings for Sun Lakes residents.
View service area →Queen Creek, AZ
Large lots, detached workshops, RV garages, and barn pads — Queen Creek jobs run bigger than average.
View service area →San Tan Valley, AZ
Hunt Hwy corridor homes with 3-car garages and the dust challenges of open-desert living.
View service area →Tempe, AZ
Older slabs, commercial parking decks near ASU, and rental properties — Tempe calls for versatility.
View service area →Free in-home estimate within 24 hours
We measure, assess the slab, and give you a written quote before leaving. No obligation.